Expert system for damage diagnosis on laptop using  forward chaining method

Erwin Okta Resa Dwiyan

doi:10.29138/ijeeit.v5i1.1858

Erwin Okta Resa Dwiyan Universitas Narotama Surabaya

DOI: https://doi.org/10.29138/ijeeit.v5i1.1858

Keywords: expert system, forward chaining, laptop

Abstract

Expert system is a computer-based system that uses knowledge. Facts and reasoning techniques in solving a problem can usually only be done by an expert in that field. In this case the author examines the damage to the laptop, the laptop is one of the computing equipment that can help humans in carrying out work, the use of laptops has increased according to needs. With the large number of users, the potential for damage to the laptop will also be greater. The problem in this research is how to write a system that can make it easier for users to diagnose damage to laptops. The method used by the author in making this expert system is Forward Chaining. The system to be built is a computer-based system. The diagnosis generated by this system is also equipped with the types of damage and symptoms on the laptop. The system will also analyze the answers to each question posed, so that diagnostic results are obtained based on the existing knowledge in this expert system.

Downloads

Download data is not yet available.

References

M. Fergusson et al., “PERANCANGAN SISTEM PAKAR UNTUK DIAGNOSA KERUSAKAN HARDWARE LAPTOP MENGGUNAKAN METODE CERTAINTY FACTOR Bhaskara,” J. Chem. Inf. Model., vol. 53, no. 9, pp. 1689–1699, 2013.
Hasanah, Ridarmin, and S. Adrianto, “Aplikasi Sistem Pakar Pendeteksi Kerusakan Laptop / Pc Dengan Penerapan Metode Forward,” J. Inform., vol. 9, no. 2, pp. 40–50, 2017.
F. Alghadari and A. P. Kusuma, “Pendekatan Analogi untuk Memahami Konsep dan Definisi dari Pemecahan Masalah,” Semin. Nas. Mat. dan Pendidik. Mat. II, pp. 113–122, 2018.
H. Mulyono, R. A. Darman, and G. Ramadhan, “Sistem Pakar Diagnosa Kerusakan Pada Laptop Menggunakan Metode Certainty Factor,” JIPI (Jurnal Ilm. Penelit. dan Pembelajaran Inform., vol. 5, no. 2, p. 98, 2020.
D. Alfrido and T. K. Gautama, “Sistem Pakar Deteksi Kerusakan Sepeda Motor dengan Metode Forward Chaining,” J. Tek. Inform. dan Sist. Inf., vol. 3, no. 3, pp. 618–636, 2017.
N. Hidayati, “Implementasi Metode Rapid Application Development Dalam Pembangunan Sistem Penerimaan Kas Atas Penjualan,” Paradigma, vol. XX, no. 1, pp. 39–47, 2018.
A. V. Pakpahan et al., “Sistem Pakar Untuk Tumbuh Kembang Anak Menggunakan Metode Forward Chaining,” Simetris J. Tek. Mesin, Elektro dan Ilmu Komput., vol. 3, no. 1, pp. 817–824, 2018.
T. A. Kurniawan, “Pemodelan Use Case (UML): Evaluasi Terhadap beberapa Kesalahan dalam Praktik,” J. Teknol. Inf. dan Ilmu Komput., vol. 5, no. 1, p. 77, 2018.
P. Savitri, “Implementasi Metode Forward Chaining Dalam Sistem Pendeteksi Kerusakan Hardware Pada Komputer Dan Laptop Berbasis Android,” Infotronik J. Teknol. Inf. dan Elektron., vol. 3, no. 1, pp. 46–55, 2018.
H. Pramudia and A. Nugroho, “Sistem Informasi Kerusakan Laptop Menggunakan Metode Naïve Bayes,” Teknol. Elektro, Univ. Mercu Buana, vol. 8, no. 3, pp. 206–214, 2017.